NeuroTherm NT1100 Operator's Manual page 30

NEUROTHERM RADIO FREQUENCY LESION GENERATOR 6-3
®
MODEL NT1100
OPERATORS MANUAL
Machine Date/Time Set up
To set the date and time via the touch screen, use the up and down arrows above and below
the relevant digit. The time can be set for a 24 Hour clock.
The alarm level is the audio level the loudspeaker inside the unit set as a percentage; using
the left and right arrows performs Navigation for the selections 25%, 50%, 75% and 100%.
The procedure tone is a selection of when the loudspeaker will produce a tone proportional
to impedance during a procedure. This can be set as None, Cordotomy or all. The tone will be
heard when Sensory Stimulation Mode has been selected and the Stimulation Output control
is turned fully anti-clockwise (Off position).
Log Bar
At the bottom of all screens there is a long white bar, which shows information of the Software
version number, Shot Number, Log Number, and Patient Name
The log number is a unique number that is automatically created by the NT1100 for every
session.
Document 109.00 10September2012 Issue 06