NeuroTherm NT1100 Operator's Manual page 76

Probe 1 reached temperature fault with stimulate
control turned on in any mode
Probe 2 reached temperature fault with stimulate
control turned on in any mode
Probe 3 reached temperature fault with stimulate
control turned on in any mode
Probe 1 reached temperature fault with RF control
turned on in any mode
Probe 2 reached temperature fault with RF control
turned on in any mode
Probe 3 reached temperature fault with RF control
turned on in any mode
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
MODEL NT1100
OPERATORS MANUAL
®
Unable to deliver stimulation
Probe 1 has been disconnected or may have a
fault.
Turn off stimulation control, check probe and
restart procedure
Unable to deliver stimulation
Probe 2 has been disconnected or may have a
fault.
Turn off stimulation control, check probe and
restart procedure
Unable to deliver stimulation
Probe 3 has been disconnected or may have a
fault.
Turn off stimulation control, check probe and
restart procedure
Unable to deliver RF Power
Probe 1 has been disconnected or may have a
fault.
Turn off RF power, check probe and restart
procedure
Unable to deliver RF Power
Probe 3 has been disconnected or may have a
fault.
Turn off RF power, check probe and restart
procedure
Unable to deliver RF Power
Probe 3 has been disconnected or may have a
fault.
Turn off RF power, check probe and restart
procedure
10September2012 Issue 06
8-9
3-146
3-147
3-148
3-149
3-150
3-151