NeuroTherm NT1100 Operator's Manual page 27

Radio frequency lesion generator
Table of Contents

Advertisement

5.
Rear Connector
Depending on the options chosen, there are a series of connectors on the rear of the
generator, some which are available to the operator and some which are covered over
with a protective cover.
Connector A- Memory socket available on all machines for use only with NeuroTherm
Memory Stick (NT-USB). DO NOT CONNECT ANY OTHER DEVICE TO THIS SOCKET
AS IT WILL COMPROMISE THE SAFETY OF THE PATIENT
Connector B 'Video Out' socket- available on some machines for use only with
NeuroTherm Video Unit (NT-VD) - this unit provides Opto-isolated connection to a remote
display. DO NOT CONNECT ANY OTHER DEVICE TO THIS SOCKET AS IT WILL
COMPROMISE THE SAFETY OF THE PATIENT
Connector C- Remote keyboard- this connector is covered over and is a keyboard
connection for service engineers only.
Connector D- Remote Mouse- this connector is covered over and is a mouse connection
for service engineers only.
6.
Contact Address
If the NeuroTherm requires a routine service or in the unlikely event of the machine
malfunctioning, the contact address of NeuroTherm Ltd is shown on the back plate. The
full address, telephone and contact details are shown in Section 11.
7.
Ventilation Apertures
These apertures are to ensure the correct air circulation within the generator and should
not be blocked or obstructed.
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
OPERATORS MANUAL
®
MODEL NT1100
10September2012 Issue 06
5-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents