NeuroTherm NT1100 Operator's Manual page 38

NEUROTHERM RADIO FREQUENCY LESION GENERATOR 6-11
®
MODEL NT1100
OPERATORS MANUAL
Patient details are stored between sessions. This allows the NT1100 to be switched off once all
of the patient's information has been entered without loss of entered data. This will make the
situation simple if all patient details are entered for the day and a delay or problem means that all
the planned sessions cannot take place on that day. The NT1100 can be switched off without
loss of entered data.
Once all planned sessions are completed then the entered sessions for the day may be deleted
in one go by selecting the (delete all) button on the patient's screen.
Once entered the new patient will be added to the patient list in the patient's screen.
To select a particular patient simply do so from the patients list displayed on the patients screen
Active States
An active state is defined as a condition where the machine is in a mode where it can supply
power to the patient.
Entering Active Procedure Screens
The machine is now ready to progress to an active state. Press 'Accept' to continue.
By default the machine will initially enter the sensory stimulation mode. If the operator wishes to
switch between any of the modes they can do so using the 'Sensory', 'Motor', 'Lesion' and 'Pulse'
Buttons on the front panel. Note, to enter Pulse Dose mode, press 'Pulse' twice.
Document 109.00 10September2012 Issue 06