NeuroTherm NT1100 Operator's Manual page 67

File Control Screen
From the welcome screen select "Options" the display will show the file control screen, select
the "More... "Button.
The "Machine control" screen will be displayed from here the following can be selected: -
Date/Time Sets Date /Time, Alarm Tone level, and Procedure Tone (None, Cordotomy or All)
Procedure Beeps
Run Self-Test
Auto Dispersive
Probe Minimum Impedance
Paper Size
Printer Com Port
Machine Control Screen
To return to the Welcome Screen Select the finish button twice
Capture Screen Facility
The Doctor can use the capture screen to add to reports or use as training documentation to give
a full record of all operations of the NT1100.
At the screen to be captured press the "Time / Count" buttons, both the up and down,
simultaneously. The unit will then chirp. After 10 seconds the unit will chirp a second time to
indicate the screen has been saved. To copy the captured screen to a USB stick.
At the Welcome screen select "Options" then select "Copy BMP Files" Insert USB Stick into
the NT1100 USB Port. The NT1100 will chirp as each captured screen is saved to the memory
stick. Wait until the Screen reverts back to the File Control Screen. The memory stick can now
be removed and the screen shots can be viewed on a computer as a word document or a BMP
File
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
OPERATORS MANUAL
Audio tones generated during a procedure (Select On or Off)
Selection of this button will activate the automatic self-test
Auto On/ Off connection of the Dispersive lead in Dual Electrode mode
Select Letter or A4
Port 1 or Port 2
®
MODEL NT1100
Select 20 or 50 Ohms
10September2012 Issue 06
7-23