Two Electrode Thermal Lesion - NeuroTherm NT1100 Operator's Manual

3. In Two Electrode RF mode, the NT1100 will only function using Auto mode. Once ready to
perform the procedure, press the

Two Electrode Thermal Lesion

Each graph shows the temperature of each electrode. The NT1100 will control the temperature of
each probe automatically. At the top left of the screen there is a read out of time remaining until
the end of the procedure. When the lesion is complete a tone will sound and the power will be
disconnected from the unit.
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
OPERATORS MANUAL
When the Doctor has the electrodes in the correct position, from the sensory and
motor. stimulation the lesion can be started
®
MODEL NT1100
or button. Press the 'Auto Start'
button to begin the procedure.
10September2012 Issue 06
7-9