NeuroTherm NT1100 Operator's Manual page 90

10.11 Simplicity II and Simplicity III
Addendum NT1100 Radio Frequency Generator
This addendum to the NT1100 Radio frequency Generator Operator's Manual explains the updates and
added features for software and introduces two additional Electrode Procedure Options with Simplicity ll
and Simplicity lll.
For instructions on upgrading the NT1000 RF generator, Contact NeuroTherm Inc. The Details are in
Section 11.0 of this Manual
Note: To use the Simplicity functionality, auto dispersive must be ON. This is activated by
pressing OPTIONS from the welcome screen, pressing MORE, pressing AUTO DISPERSIVE, pressing
ON, and pressing FINISH.
1. Procedure Setting Screen
Electrode Selection Menu
Simplicity ll and Simplicity lll Electrode options have been added to the Procedure Settings
Page. The Electrode selection screen now gives the user the choice to select from a list of ten
options. The left hand side of the table shows the electrode mode choices, the right hand
shows the output sockets that will be used in a given mode. A corresponding cross in the
column indicates that the socket will be active in that mode. If more than one cross appears in
a row the option indicates a multiple electrode procedure. To make an electrode selection,
use the touch screen to highlight the choice and press the "Accept" button. This will return
the user back to the Procedure settings screen.
Document 109.00
NEUROTHERM RADIO FREQUENCY LESION GENERATOR
OPERATORS MANUAL
®
MODEL NT1100
10September2012 Issue 06
10-10