There are 7 parts to the setup procedure:
Motor
Select your motor from the library. First, select the general motor type. Then
select your specific motor.
on the list. If your motor is not on the list, you may define a motor and all of its
parameters. Click "Download" when finished.
Control
The "Control ID" is automatically selected. All of the parameters will be entered if
your control is on the list.
A-2 Manual Tuning
All of the parameters will be entered if your motor is
Figure A-3 Motor Selection Screen
Click "Download" when finished.
Figure A-4 Control Selection Screen
MN1276