Baldor FPX A05T Installation & Operating Manual page 107

Sys.mod 2: Pulse Follower (Handwheel respectively Pulse/Direction)
Parameters:
Command Description
HW.GRFX Queries/updates mantissa HW gear
parameter, negative value means negative
gear.
HW.GRSH Queries/updates shift HW gear parameter
HW.PLC GEAR Queries/ updates PLC gear ratio
HW.RES Queries / updates HW resolution in pulses
per revolution (only necessary for
HW.TYPE Queries / updates HW type: 0 -- None, 1 --
Pulse and Direction at connector X3, 2 -- A
leads B at connector X9, 3 -- B leads A
respectively, Pulse and Direction at
connector X92, 4 -- A leads B at connector
X32
B-16 Command Set
Units Range
--32767 :
32767
0 : 32767
0 : 65535
pulses/rev. --32768 :
32767
Default E / Par. set
2
E / P
E / P
E / P
E / P
E / P
MN1276