Destination/Image File - Logicube Talon Ultimate User Manual

4.4 Destination/Image File

Tap the Destination or Image File icon to select the Destination drive or Image File. The
Destination or Image File screen will show all drives connected to the Destination positions.
When using Drive to File or File to File, if the Destination drive is not formatted
properly, the Location will appear as "(NOT_MOUNTED)" and a format icon will
appear in the Format column. Tap the
Drives encrypted by the Talon Ultimate will have the following icon:
When formatting the drive from this screen, a prompt will appear to format the
drive.
Select which file system to use and whether to format with encryption (ON) or
without encryption (OFF). For details on formatting a drive, see
Formatting the drive may take several minutes, especially with encryption. Tap
the OK icon to continue.
The default selection for the screen above can be changed in the Manage
Repositories – Configuration screen. See
For in-depth information regarding drive encryption, please see
Drive Encryption and Decryption
Logicube Talon Ultimate™ User's Manual
(Format) icon the Destination drive.
Section
Section 5.8.3 for more information.
Chapter 7:
IMAGING
5.3.2.3.
45