Zero Configuration Networking (Zeroconf) - Logicube Talon Ultimate User Manual

2. Turn the Talon Ultimate on and allow it to boot up completely.
3. Open the SSH client and select an SSH connection.
4. Connect to the Talon Ultimate either by IP address or by name. The name
5. Login with the username "it" (without the quotes) and the password "it"
The Talon Ultimate can now be configured or managed via the command line
interface.

9.3 Zero Configuration Networking (Zeroconf)

The Talon Ultimate has the capabilities for Zero Configuration Networking (Zeroconf). Zeroconf
allows devices to automatically create a usable computer network based on the Internet Protocol
Suite (TCP/IP). For example, when the Talon Ultimate is connected (connected via a network
cable) directly to a Windows based computer that is DHCP enabled, both the Talon Ultimate and
the Windows based computer will automatically configure themselves to be seen by each other
using TCP/IP with a 169.254.x.x IP address configuration.
Logicube Talon Ultimate™ User's Manual
of the Talon Ultimate will be talon-XXXXXX where XXXXXX is the 6-digit
serial number of the Talon Ultimate).
On some Operating Systems, the Talon Ultimate will
need to be accessed by opening talon-XXXXXX.local.
(without the quotes). A command prompt should appear in the SSH
window.
REMOTE OPERATION
112