Imaging - Logicube Talon Ultimate User Manual

Configuration – Allows the user to change the default format option for drives
•
that are not formatted by the Talon Ultimate.
10. SYSTEM SETTINGS
Ultimate which include the following:
Profiles – Allows the user to create, save, apply, or delete user
•
profiles/configurations.
Passwords – Allows the user to set a password to lock the Talon Ultimate from
•
any configuration changes.
Encryption – Sets the cipher mode (VCRPYT, TC-XTS, CBC, or ECB), Cipher, IV
•
Generation, and the encryption password.
Language/Time Zone – Sets the language on the Talon Ultimate's menu and
•
change the system's Time Zone.
Display – Sets the Talon Ultimate's display/screen brightness and enable/disable
•
Stealth Mode
Notification – Sets audible beeps/notifications for when a task successfully
•
completes or if an error appears.
11. NETWORK SETTINGS
are available:
Interfaces – Edit TCP/IP and enable or disable certain network services.
•
HTTP Proxy – Set proxy settings (if required by the user's network).
•
12. SOFTWARE UPDATES
Software can be updated over an internet connection (from network) or from a USB flash
drive. Two tabs will be displayed:
Software Updates – This is the screen where users can check for new software
•
and update or reload the software.
Firmware Update – Firmware for the Talon Ultimate (if available) can be updated
•
on this screen.
13. POWER OFF – Turn the Talon Ultimate off or refresh the Graphical User Interface (GUI)
and set a drive timeout, powering down drives when not in use. Two tabs are available:
Power Off – The Talon Ultimate can be turned off on this screen. This can be
•
useful when using the web interface. The User Interface can also be refreshed in
this screen.
Drive Power – Drives can be powered down automatically when not in use.
•

5.1 Imaging

This type of operation allows the imaging of a Source to a Destination. There
are three different imaging modes and several settings to choose from. These
selections should be performed in order from left to right.
In-depth details on the different screens found in the Imaging operation can be
found in Chapter 4: Imaging.
Logicube Talon Ultimate™ User's Manual
– This mode allows changes to the system settings on the Talon
– Allows the editing of various network configurations. Two tabs
– Perform software and firmware updates on the Talon Ultimate.
TYPES OF OPERATIONS
49