System Settings; Network Settings; Software Updates - Logicube Talon Ultimate User Manual

3.10 System Settings

The System Settings screen allows users to configure different settings for the
Talon Ultimate:
Details on the different System Settings screens
can be found in
Profiles
•
Passwords
•
Encryption
•
Language/Time Zone
•
Display
•
Notifications
•

3.11 Network Settings

The following tabs are seen in the Network settings:
Details on the different Network Settings screens
can be found in
Interfaces – Allows the configuration of the network interface which include setting a
•
static IP address and allows certain network services to be enabled or disabled.
HTTP Proxy – For the Talon Ultimate to be able to update software from a network (over
•
the internet), proxy settings may need to be set. Networks that have a proxy server for
internet access will require proxy settings for devices like the Talon Ultimate to connect to
the Internet. This typically includes a server (or IP address), a host port, a username and
password.

3.12 Software Updates

New and improved software will be released from time to time. There are two
ways to update the software on the Talon Ultimate: From the web via a network
connection or from a USB drive.
Details on how to perform a software update, software re-load, or firmware
update can be found in
Logicube Talon Ultimate™ User's Manual
Section 5.10: System Settings.
Section 5.11: Network
Chapter 8: Updating/Loading/Re-loading
Settings.
QUICK START
Software.
32