4: Imaging; Imaging - Introduction; Mode - Logicube Talon Ultimate User Manual

4.0 Imaging - Introduction

This type of operation allows the imaging of a Source drive to a Destination.
There are three different imaging modes and several settings to choose from.
These selections should be performed in order from left to right.
There are four selections when performing an image:

Mode

•
Drives
•
Settings
•
Destination
•
4.1 Mode
Tap this icon to choose between the following imaging modes:
Drive to Drive – Performs a bit-for-bit copy of the Source producing an exact duplicate
•
of the Source drive.
Drive to File – Images the Source to any of the following image output file formats: DD,
•
E01, EX01, or DMG.
Ultimate User's Manual
®
Logicube Talon

4: Imaging

34