Destination/Image File - Logicube Falcon-NEO User Manual

4.4 Destination/Image File

Tap the Destination or Image File icon to select the Destination drive or Image File
When Drive to Drive or File to Drive mode is selected, the Destination screen will show all drives
connected to the Destination positions.
When using Drive to File, File to File, Partition to File, or Net Traffic to
File, if the Destination drive is not formatted properly, the Location
will appear as "(NOT_MOUNTED)" and a format icon will appear in
the Format column. Tap the
Encrypted drives will have the following symbol in the Format column:
When formatting the drive from this screen, a prompt will appear to
format the drive.
Select which file system to use and whether to format with encryption
(ON) or without encryption (OFF). For details on formatting a drive,
see Section
especially with encryption. Tap the OK icon to continue.
The default selection for the screen above can be changed in the
Manage Repositories – Configuration screen. See
more information.
For in-depth information regarding drive encryption, please see
Chapter 7: Drive Encryption and Decryption.
Logicube Falcon -Neo User's Manual
®
the 1 st segment, then continue capturing network traffic, and
create a new first segment file.
OFF – When this is set to OFF, once the Falcon-NEO reaches the
▪
number of segments set, it will stop the task.
(Format) icon the Destination drive.
5.3.2.3. Formatting the drive may take several minutes,
Section 5.9.3 for
IMAGING
47