Logicube Talon Ultimate User Manual page 112

2. Select the encrypted disk to mount (in this example, it is Disk #5). Place a
3. In the Key tab, enter the Key (password) and make sure the Hash is set to
4. In the Encryption tab, set the Cipher to AES (256 bit CBC). Set the
Logicube Talon Ultimate™ User's Manual
check mark on the Entire disk option. FreeOTFE cannot read the
partition table on the drive since it is encrypted at this time.
RIPEMD-160.
Initialization Vector (IV) generation method to match what was used
in the IV Generation on the Talon Ultimate. In this example, "plain64'
was used. In the 'Sector zero location', choose Start of encrypted data.
DRIVE ENCRYPTION & DECRYPTION
103