Logicube Talon Ultimate User Manual page 130

4. Double-click the drive. Alternatively, the drive can be highlighted, then
Logicube Talon Ultimate™ User's Manual
from the menu system, go to Tools then Ext2 Volume Management.
The following screen will appear. Make sure that there is a check mark
next to "Automatically mount via Ext2Mgr. Also, make sure there is a
drive letter assigned (to the right of this option). If not, assign an
available drive letter. Click the Apply button.
Do not uncheck the "Mount volume in readonly mode"
unless it is absolutely certain that the mounted drive needs
to be over-written or erased (whether partially or fully).
VIEWING EXT4 IN WINDOWS
121