Deleting Log Files; Accessing The Logs Over A Network - Logicube Talon Ultimate User Manual

3.7.2 Deleting log files

Log files can be deleted one at a time or all at once.
•
•
A log file deletion password can be set to add a layer of security when deleting
log files. If a password was set, log files cannot be deleted without entering the
correct password.
•
•

3.7.3 Accessing the logs over a network

The log files can also be accessed through a network on a computer if the Talon
Ultimate is connected on the same network.
1. Open Windows Explorer or a similar window and browse to the
Logicube Talon Ultimate™ User's Manual
Connect a formatted USB drive (USB flash drive or USB external
a.
drive) to one of the two USB ports located on the front of the
Talon Ultimate.
Tap the Export icon to export the log file via USB. The log will be
b.
exported/copied to the attached USB drive and will be in HTML,
PDF, and XML formats.
Repeat steps 2 and 3 if other log files need to be exported or viewed.
Alternatively, all the log files can be exported by tapping the Select
All button to select all the log files. Once all log files are selected,
they can be exported in a single operation.
To print the log files, it is recommended to use the web interface as
described in Chapter 9: Remote Operation
on the upper-right corner of the screen. The browser's print menu
will appear, and the log can be printed to an available printer on
configured on the computer.
To delete a single log file, tap the log file to highlight the log file to be
deleted. Tap the Delete icon to delete the selected log file.
To delete all the log files, tap the Select All icon to select all the log files,
then tap the Delete icon.
If a log file deletion password was not created, a confirmation screen will
appear confirming to delete the single log file or all log files.
If a log file deletion password was created, a screen will appear
prompting to enter the log file deletion password. Enter the log file
deletion password. Tap the OK icon to delete the single log file or all the
log files (depending on which was selected).
The password can be set in the Systems Settings.
More information about the log file deletion
password can be found in
hostname or the IP address found in the Statistics screen. See
5.8 for more information on the Statistics screen.
QUICK START
and click the print icon
Section 5.10.2.
Section
29