Logicube Talon Ultimate User Manual page 57

2. HASH/VERIFY
of a case (image).
3. WIPE/FORMAT
There are three main settings:
Secure Erase – Sends a command to the drive instructing it to perform a secure
•
erase based on the drive manufacturer's specifications.
Wipe Patterns – Allows the user to set a specific pattern to use for wiping the
•
drive. The number of passes is customizable (up to 7 passes) along with the type
of data written for each pass. In addition, a 7-pass DoD wipe can be set.
Format – Formats the Destination using any of the following file systems (with or
•
without AES-256 encryption):
EXT4
o
NTFS
o
EXFAT
o
FAT32
o
4. PUSH – The network Push feature gives users the ability to push evidence files from
destination drives connected to the Talon Ultimate or from a Talon Ultimate repository to
a network location. The Push feature provides a more secure method than simply copying
and pasting to the analysis computer by performing an MD5 or SHA hash during the
push process. Additionally, users can select to verify the file transfer to ensure data
integrity. Network users can then quickly preview data or copy data to a local drive or to
any other directory on the network. The Talon Ultimate will create a log file for each push
process.
5. USB DEVICE – Allows the user to view the contents of any drive connected to the Talon
Ultimate from a computer connected via USB. When using this type of operation, all
drives connected to the Talon Ultimate are write-protected.
6. FILE BROWSER
the Talon Ultimate. The Talon Ultimate will show all viewable partitions and the contents
of each partition.
7. LOGS – Display logs of each task that has been performed on the Talon Ultimate.
8. STATISTICS – This will display four tabs that include:
About – Displays information about the Talon Ultimate
•
Advanced Drive Statistics – Shows raw S.M.A.R.T. data on any drive connected
•
to the Talon Ultimate.
Options – Shows available options and which ones are installed.
•
Network Interface Stats – Shows statistics and information on the Network
•
Interface
9. MANAGE REPOSITORIES
that can be used as a Destination for imaging or pushing images. This will display three
tabs that include:
Add/Remove – Allows the user to add, remove, or edit networked repositories.
•
iSCSI – Allows the user to set ISCSI protocol settings.
•
Logicube Talon Ultimate™ User's Manual
– Perform a SHA-1, SHA-256, or MD5 hash of a drive or verify the file hash
– This type of operation is used to erase, wipe, and/or format drives.
– Preview the contents of all connected Source or Destination drives on
– Allows the user to add a network location as a repository
TYPES OF OPERATIONS
48