Forgotten Password For Any Keys - Logicube Talon Ultimate User Manual

Logicube Talon Ultimate™ User's Manual
Software Updates – This entire section
•
cannot be accessed without the Config
lock unlock key.
Power Off – This entire section cannot
•
be accessed without the Config lock
unlock key.
The Talon Ultimate can
still be turned off without
the unlock key by using
the power button located
on the top of the Talon
Ultimate.
5.10.2.1.2 Forgotten password for any
keys
If any of the keys is forgotten, the INITIAL.DB
profile will need to be loaded using the
Command Line Interface (CLI). See
for more information on how to connect to the
Talon Ultimate using the CLI.
This method will only work if the
INITIAL.DB profile does not have
a Config Lock Key saved. If the
INITIAL.DB has a Config Lock
Key configured, and the
password was forgotten, contact
Tech Support assistance.
Once connected to the Command Line Interface
(CLI):
1. Login with the username "it" (without
the quotes) and the password "it"
(without the quotes).
2. From the main prompt, type command,
then press the enter key.
3. Type config then press the enter key.
4. Type db list then press the enter key.
This will show a list of profiles (or
databases) saved. The Talon Ultimate
has one default profile called initial.db.
Any profiles added by users will appear
in this list. The example below shows
two databases (the default initial.db and
lock.db). The db that shows an asterisk
(*) before the name is the current
TYPES OF OPERATIONS
Section 9.2
79