Case Info; Wipe / Format - Logicube Talon Ultimate User Manual

5.2.4 Case Info

The Case Info setting allows users to enter some information about the case.
Case Info is not required to start a Hash or Verify operation.
Information entered here will appear in the logs. More information on the Case
Info screen can be found in

5.3 Wipe / Format

This type of operation allows the user to erase, wipe, and/or format one or
more Destination drives. There are three main settings: Secure Erase, Wipe
Mode, and Format.
Secure Erase – Sends a command to the drive instructing it to perform a secure erase
•
based on the drive manufacturer's specifications for the secure erase command.
Wipe Patterns – Allows the user to set a specific pattern to use for wiping the drive. The
•
number of passes is customizable (up to 7 passes) along with the type of data written for
each pass. In addition, a 7-pass DoD wipe can be set with pre-selected pass values.
Format – Formats the Destination drive with one of the following user selectable file
•
systems (with or without encryption): EXT4, NTFS, exFAT, FAT32.
More information on encryption
can be found in
Logicube Talon Ultimate™ User's Manual
Both – Will verify both SHA-1 and MD5 if the SHA-1+MD5 hash
was selected during the image process.
Section 4.3.1.
Chapter 7.
TYPES OF OPERATIONS
54