Table of Contents
Advertisement
8.
8.2 Firmware Loading Instructions
Some software releases may contain a firmware upgrade. The steps below outline how to check if
there is a firmware upgrade available:
1. After the software is updated the unit on then tap the Software Updates icon.
2. Tap the "Firmware Update" page. One of two screens will appear:
a.
FIRMWARE UPGRADE AVAILABE – Tap the Update icon. A message will appear:
"FIRMWARE UPDATE COULD TAKE UP TO A FEW MINUTES TO COMPLETE;
PLEASE DO NOT INTERRUPT POWER DURING THIS TIME. ON COMPLETION THE
UNIT WILL AUTO-RESTART AND CONFIRM THE UPDATE." Tap the OK icon to
start the firmware update process.
b. FIRMWARE UPGRADE NOT AVAILABLE – This message will appear if the device
does not require a firmware update. No further action is necessary if this message
appears.
Logicube Talon Ultimate™ User's Manual
UPDATING THE TALON ULTIMATE SOFTWARE
Verify the software version is correct by going to the Software Updates
screen.
When the OK icon is tapped, the screen may appear to do
nothing. Do not keep tapping the OK icon. The firmware update
will take no more than 120 seconds. When the firmware update
finishes, the unit will reboot automatically.
109
Advertisement
Table of Contents
Need help?
Do you have a question about the Talon Ultimate and is the answer not in the manual?