Notifications - Logicube Talon Ultimate User Manual

Stealth Mode – Stealth mode turns the Talon Ultimate's screen off, allowing
privacy so no one can see what the Talon Ultimate is doing. When Stealth mode
is activated, currently running operations continue to run.
To turn Stealth mode on, tap ON.
To turn Stealth mode off and restore the Talon Ultimate's display, tap anywhere
on the screen.

5.10.6 Notifications

To access the Notifications tab in the System Settings screen, tap the right
navigation arrow below the Talon Ultimate logo (located on the top-right of the
screen):
The Talon Ultimate can produce audible notifications (beeps) when a task finishes
successfully or if an error appears.
1. Tap End of Task to configure the notifications.
2. Select None or Sound for when the Talon Ultimate has a successful task or if
the task has an error.
3. Tap the OK icon when finished.
Logicube Talon Ultimate™ User's Manual
The screen brightness cannot be saved and loaded
as a user profile/configuration. Each time the Talon
Ultimate boots, the brightness will be reset.
Stealth mode will not have any effect when using the Graphical
User Interface through a computer's Internet browser.
End of Task notifications can be saved into a user
profile and loaded each time the Talon Ultimate is
turned on. See Section 5.10.1
information on saving and loading a user profile.
TYPES OF OPERATIONS
for more
84