Decrypting A Talon Ultimate Encrypted Destination Drive With A Talon Ultimate; Step-By-Step Instructions - Logicube Talon Ultimate User Manual

2.
3.
4.
5.
7.2 Decrypting a Talon Ultimate encrypted Destination drive with a Talon
Ultimate
Talon Ultimate can decrypt a Destination drive encrypted by the Talon Ultimate. To decrypt the
drive using a Talon Ultimate, the correct encryption settings must be set. After the encryption
settings are set, the drive needs to be connected to the Talon Ultimate, and the Talon Ultimate
can then be connected to a computer via USB.

7.2.1 Step-by-step Instructions

1. Turn the Talon Ultimate on. Make sure the previously encrypted
2. From the main menu, select System Settings from the types of
3. Tap the Encryption Settings tab.
4. Set the Cipher Mode, Cipher, IV Generation, and Password. These
5. Connect the previously encrypted Destination drive to one of the
6. Select USB Device from the types of operation on the left side. When
Logicube Talon Ultimate™ User's Manual
From the main menu, select System Settings from the types of
operations on the left side.
Tap the Encryption Settings tab.
Set the Cipher Mode, Cipher, IV Generation, and Password that was
used for the previously encrypted Destination drive.
Connect the previously encrypted Destination drive to one of the
Destination ports.
If the same encryption settings are commonly
used, the encryption settings and configuration
can be saved as a profile, so they do not have
to be entered manually all the time.
Destination drive is not connected.
operations on the left side.
should be set to the same values as to how the drive was encrypted. If
the values are incorrect, the drive will not be decrypted properly, and the
data will be unrecognizable.
Destination ports.
this type of operating is selected, the following screen will appear:
DRIVE ENCRYPTION & DECRYPTION
96