Special Settings In File To File Mode; Root Directory; Output Format; Filter Settings - Logicube Talon Ultimate User Manual

4.3.7 Special Settings in File to File mode

There are three special settings screens in File to File Mode:
•
•
•
Logicube Talon Ultimate™ User's Manual

Root Directory

Output Format

Filter Settings

4.3.7.1 Root Directory
In this screen, the top level (root) directory can be set. All
searches will start from this directory. For example, the fourth
partition of the drive on SAS_S1 can be selected by tapping the
folder icon. The folder icon is only selectable after a Source is
selected.
4.3.7.2 Output Format
The Output format screen shows four selections:
Directory Tree – All results will be written in a directory
•
tree format. All files will appear in the same directory
structure as found on the Source drive.
MFT Report – Results will list deleted files (if present)
•
that can potentially be restored or recovered.
LX01 Archive – Results will be in Encase LX01 archive
•
format.
Zip Archive – Results will be in a Zip archive format.
•
4.3.7.3 Filter Settings
The Filter Settings screen shows three selections:
This screen allows the user to set several filters
(path, file signatures, keywords) and setting an
incorrect filter or setting the filter too narrow
may adversely affect results. Each filter
narrows down the results. For example, if only
video files are selected in the Signature Based
File Category filter, it will narrow down the
results of the path filter to only video files
within the results of the first filter.

4.3.7.3.1 Path Filter

Allows the user to set preset filters or specify a
preset filter and/or custom filter. This is the first
level of filtering.
IMAGING
42