Source; Settings - Logicube Talon Ultimate User Manual

File to File (Targeted Imaging feature) – Create logical images by using preset filters,
•
custom filters, files signatures filter, and/or keywords search function to select and
acquire only the specific files needed. Output formats available are: LX01, ZIP or directory
tree. Optionally an MFT report can be generated, which contains a list of deleted files (if
present) that can potentially be restored or recovered.
The File to File Imaging mode requires the Targeted Imaging Option
(File to File) purchased and installed.
To perform more than one task at a time (Image, Hash, Wipe/Format),
the Multi-Task Option must be purchased and installed.

4.2 Source

Tap the Source icon to select the Source drive to be imaged. Talon Ultimate will list all the drives
connected to the Source position(s).
The (More Info) icon displays more information on the drive. The
drive details window will appear showing information about the drive.

4.3 Settings

Tap the Settings icon to change the image settings. Depending on the selected mode, different
screens will appear.
Case Info – Available in all modes. See
•
HPA/DCO/TRIM – Available in the following modes: (Trim is available only in Drive to
•
Drive mode). See
Drive to File
o
Drive to Drive
o
Error Handling – Available in the following modes (See
•
Logicube Talon Ultimate™ User's Manual
Section
Section 4.3.2.
4.3.1.
Section 4.3.3):
IMAGING
35