10: Viewing Source And Destination Drives Over A Network; Viewing Drives Over A Network - Overview; Viewing Source Or Destination Drives Over The Network Using Smb; Step-By-Step - Viewing Source Or Destination Drives - Logicube Talon Ultimate User Manual

10: Viewing Source and Destination Drives over a Network

10.0 Viewing drives over a network – Overview
The contents of drives connected to any Source or Destination position on the Talon Ultimate can
be viewed over a network.
Contents of Source and Destination drives
viewed over a network are write-protected.

10.1 Viewing Source or Destination drives over the network using SMB

Contents of a Source or Destination drive can be viewed over a network using built-in file
explorers/viewers like File Explorer.
10.1.1 Step-by-step – Viewing Source or Destination drives
1. Connect the Talon Ultimate directly to a network or directly to a
2. On the computer (on the same network, or directly connected to the
Ultimate User's Manual
®
Logicube Talon
computer (using a network cable).
Talon Ultimate), open File Explorer and browse the Talon Ultimate's IP
address or the hostname of the Talon Ultimate with its serial number.
Both IP address and serial number can be found by going to the
Statistics screen on the Talon Ultimate. For example, browse to
\\192.168.1.100 or \\talon-XXXXXX where XXXXXX is the 6-digit serial
number of the Talon Ultimate.
113