Siemens SINAMICS G130 Engineering Manual page 447

Power requirement of supplementary components
The following components are connected in each case in the installed S120 Cabinet Modules downstream of the fuse
protection for the auxiliary voltage supply system. The power requirement must be added to the basic requirement of
the relevant Cabinet Module specified on the pages above.
CU320-2 Control Unit
Voltage
Maximum power requirement (at 24 V DC) without taking
account of digital outputs and expansions in the option slot
Maximum fuse protection
Digital inputs:
§ Voltage
§ Low level (an open digital input is interpreted as "low")
§ High level
§ Power consumption (typ. at 24 V DC)
Digital outputs (continuously short circuit proof):
§ Voltage
§ Maximum load current per digital output
Terminal Module 31 (TM31)
Voltage
Maximum power requirement (at 24 V DC) without taking
account of digital outputs and DRIVE-CLiQ supply
Digital outputs (continuously short circuit proof):
§ Voltage
§ Maximum load current per digital output
Sensor Module Cabinet-Mounted 10 (SMC10)
Voltage
Maximum power requirement (at 24 V DC) not taking
encoder into account
Sensor Module Cabinet-Mounted 20 (SMC20)
Voltage
Maximum power requirement (at 24 V DC) not taking
encoder into account
Sensor Module Cabinet-Mounted 30 (SMC30)
Voltage
Maximum power requirement (at 24 V DC) not taking
encoder into account
Advanced Operator Panel 30 (AOP30)
Voltage
Maximum power requirement (at 24 V DC):
- Without backlit display
- With maximum backlit display
SINAMICS S120 Cabinet Modules
24 V DC (20.4 V – 28.8 V)
1.0 A
20 A
12 floating digital inputs
8 bidirectional non-floating digital outputs/digital inputs
-3 V to +30 V
-3 V to +5 V
+15 V to +30 V
9 mA
8 bidirectional non-floating digital outputs/digital inputs
24 V DC
500 mA
24 V DC (20.4 V – 28.8 V)
0.2 A
4 bidirectional non-floating digital outputs/digital inputs
24 V DC
100 mA
24 V DC (20.4 V – 28.8 V)
0.2 A
24 V DC (20.4 V – 28.8 V)
0.2 A
24 V DC (20.4 V – 28.8 V)
0.2 A
24 V DC (20.4 V – 28.8 V)
100 mA
200 mA
SINAMICS Engineering Manual – November 2015
Engineering Information
447/528
Ó Siemens AG