Electrical installation
7.12.6
Sine Encoder with HIPERFACE (X1)
Wiring of a single-turn or multi-turn sine-cosine encoder with HIPERFACE interface as a
feedback system (primary and secondary, ð p.76).
The thermal control in the motor is connected via the encoder cable to X1 and evaluated
there. All signals are connected using our pre-assembled encoder connection cable.
If cable lengths of more than 50m are planned, please consult our customer service.
Frequency limit (sin, cos): 350 kHz
Type
HIPERFACE
The pin assignment shown on the encoder side relates to the Kollmorgen motors.
82
07/2014
FBTYPE
2
SubD15
S700
S701x2-S724x2 Instructions Manual
Kollmorgen
EXTPOS
GEARMODE
9
17pol.rund
9