Kollmorgen S700 Instruction Manual page 145

Kollmorgen
9.2.3.1.3 SSI Encoder (X5, X1)
Wiring of a synchronous serial absolute-encoder as a feedback system (primary or
secondary, ð p.76). The signal sequence can be read in Gray code or in Binary (stan-
dard) code.
The power supply for the encoder and thermal control in the motor is connected to X1
and evaluated there.
If cable lengths of more than 50m are planned, please consult our customer service.
Frequency limit: 1.5 MHz
Type
SSI
Switch on supply voltage for the encoder at X1: set ENCVON to 1
S701x2-S724x2 Instructions Manual
07/2014
FBTYPE
9
S700
EXTPOS GEARMODE
5 5
Expansions
ENCMODE
0
145