Sine Encoder With Biss Analog (X1) - Kollmorgen S700 Instruction Manual

Electrical installation
7.12.2

Sine Encoder with BiSS analog (X1)

Wiring of a single-turn or multi-turn sine-cosine encoder with BiSS interface as a feed-
back system (primary and secondary, ð p.76).
The thermal control in the motor is connected via the encoder cable to X1 and evaluated
there. All signals are connected using our pre-assembled encoder connection cable. If
cable lengths of more than 50m are planned, please consult our customer service.
Frequency limit (sin, cos): 350 kHz
Type
5V analog (BiSS B)
12V analog (BiSS B)
The pin assignment shown on the encoder side relates to the Kollmorgen motors.
78
07/2014
FBTYPE EXTPOS
23
24
SubD 15
S700
S701x2-S724x2 Instructions Manual
GEARMODE
- -
- -
round, 17-pin
Kollmorgen
Up
5V +/-5%
7,5...11V