Prohibited Use; Handling; Transport; Packaging - Kollmorgen S700 Instruction Manual

Kollmorgen
2.3

Prohibited use

Other use than described in chapter 2.2 is not intended and can lead to damage of per-
sons, equipment or things.
The use of the servo amplifier in the following environments is prohibited:
-
-
-
-
Commissioning the servo amplifier is prohibited if the machine in which it was installed,
-
-
-
The control of holding brakes by the S700 alone may not be used in applications, where
functional safety is to be ensured with the brake.
2.4

Handling

2.4.1

Transport

l
l
l
l
l
The servo amplifiers contain electrostatically sensitive components, that can be damaged
by incorrect handling. Discharge yourself before touching the servo amplifier. Avoid
contact with highly insulating materials, such as artificial fabrics and plastic films. Place
the servo amplifier on a conductive surface.
2.4.2

Packaging

l
l
l
S701x2-S724x2 Instructions Manual
potentially explosive areas
environments with corrosive and/or electrically conductive acids, alkaline solutions,
oils, vapors, dusts
directly on non-grounded supply networks or on asymmetrically grounded supplies
with a voltage >240V.
on ships or off-shore applications
does not meet the requirements of the EC Machinery Directive
does not comply with the EMC Directive or with the Low Voltage Directive
does not comply with any national directives
Transport by qualified personnel in the manufacturer's original recyclable packaging
Avoid shocks while transporting
Transport temperature:
Transport humidity:
If the packaging is damaged, check the unit for visible damage. In such an event, in-
form the shipper and the manufacturer.
Recyclable cardboard with inserts
Dimensions: S701...S712 (HxWxD) 125x415x350 mm
S724
Labeling: name plate on outside of box
07/2014
-25 to +70°C, max. rate of change 20K / hour,
class 2K3 acc. to EN61800-2, EN 60721-3-1
max. 95% relative humidity, no condensation,
class 2K3 acc. to EN61800-2, EN 60721-3-1
(HxWxD) 155x415x350 mm
Safety
13