Rod (Aquadb) 24V With Hall (X3, X1) - Kollmorgen S700 Instruction Manual

Electrical installation
7.12.14

ROD (AquadB) 24V with Hall (X3, X1)

Wiring of a 24V incremental encoder (ROD, AquadB) and Hall sensors as a feedback unit
(primary, ð p.76). For the commutation hall sensors are used and for the resolution an
incremental encoder.
The thermal control in the motor is connected to X1 and evaluated there. If cable lengths
of more than 25m are planned, please consult our customer service.
Frequency limit X3: 100 kHz, X1: 350 kHz
Type
AquadB 24V + Hall
90
07/2014
FBTYPE
14
S700
S701x2-S724x2 Instructions Manual
Kollmorgen
EXTPOS GEARMODE
- -