Sine Encoder With Hall (X1) - Kollmorgen S700 Instruction Manual

Kollmorgen
7.12.9

Sine Encoder with Hall (X1)

Feedback devices (incremental or sine-cosine), which don't deliver an absolute informa-
tion for commutation, can be used as complete feedback system combined with an addi-
tional Hall encoder (primary, ð p.76).
The thermal control in the motor is connected to X1 and evaluated there.
All signals are connected to X1 and evaluated there. If cable lengths of more than 25m
are planned, please consult our customer service.
Frequency limit (sin, cos): 350 kHz
Type
SinCos 5V with Hall
SinCos 12V with Hall
S701x2-S724x2 Instructions Manual
07/2014
FBTYPE
5
6
SubD15
S700
Electrical installation
EXTPOS GEARMODE
- -
- -
Up
5V +/-5%
7,5...11V
85