Technical Description; The S700 Family Of Digital Servo Amplifiers - Kollmorgen S700 Instruction Manual

Kollmorgen
5

Technical description

5.1

The S700 family of digital servo amplifiers

Standard version
l
l
l
l
l
l
l
l
l
l
l
l
Power section
l
l
l
l
l
l
l
l
l
S701x2-S724x2 Instructions Manual
Large supply voltage range: 1 x 110V
Overvoltage category III acc. to IEC 61800-5-1
2 housing dimensions:
CANopen onboard
EtherCAT onboard
RS232 and 24V pulse direction interface onboard
Resolver-, Encoder-, AquadB Encoder-, ComCoder- evaluation onboard
Position controller onboard
Safe Stop STO onboard (up to SIL CL3, PLe)
3 frontside slots for expansion cards
Memory Card slot onboard
Synchronous servomotors, linear motors, asynchronous motors and DC motors can
be used
S7xx6: Directly on grounded mains supply, 1x110V
S7xx0: Directly on grounded mains supply, 3x208V
TN-network or TT-network with grounded neutral point, 42kA max. symmetrical cur-
rent rating, connection to other supply types only via isolating transformer,ðp.66
B6 bridge rectifier, integral supply filter and soft-start circuit
Fusing (e.g. fusible cutout) to be provided by the user
Shielding All shielding connections are made directly on the amplifier
Output stage IGBT module with floating current measurement
Brake circuit with dynamic distribution of the generated power between
several amplifiers on the same DC bus link circuit. Internal
brake resistor as standard, external brake resistors if required.
DC bus link voltage 135...900 V DC, can be connected in parallel.
Interference suppression filters are integrated for the electrical supply feed and the
24V auxiliary supply voltage (with motor cable £ 10m for C2 as per IEC 61800-3, with
motor cable > 10m for C3 as per IEC 61800-3).
07/2014
... 3 x 480V
-10%
S701...S712 70 mm
S724 100 mm
Technical description
+ 10%
+10%
... 3x230V , 50/60Hz
-10%
+10%
... 3x480V , 50/60Hz
-10%
25