Table of Contents
Advertisement
LANCOM GS-2124
Chapter 4: Operation of Web- based Management
4.3.8
Configuration
Port Configuration is applied to change the setting of each port. In this confi-
guration function, you can set/reset the following functions.
46
Port Configuration
It is used to set each port's operation mode. The switch supports 3 para-
meters for each port. They are State, Speed/Duplex and Flow Control.
Parameter
Speed/Duplex:
Set the speed and duplex of the port. In speed, 10, 100 and
1000 MBit/s baud rate is available for Ethernet at the ports 1-24. If
the media at the SFP-ports 21, 22, 23 and/or 24 is 1Gbps fiber, it is
always 1000Mbps and the duplex is full only. If the media is TP, the
Speed/Duplex is comprised of the combination of speed mode, 10/
Advertisement
Table of Contents
