Table of Contents
Advertisement
LANCOM GS-2124
Chapter 4: Operation of Web- based Management
VLANs to follow separate paths, each based on an independent Multiple
Spanning Tree Instance (MSTI), within Multiple Spanning Tree (MST) Regions
composed of LANs and or MST Bridges. Proper configuration of MSTP in an
802.1Q VLAN environment can ensure a loop-free data path for a group of
VLANs within an MSTI. Redundant path and load balancing in VLAN environ-
ment is also achieved via this feature.A spanning tree instance called
CIST(Common and Internal Spanning Tree) always exists . Up to 64 more span-
ning tree instances (MSTIs) can be provisioned.
4.15.1
Status
4.15.2
Region Config
136
MSTP State
To enable or disable MSTP. And to select a version of Spanning Tree pro-
tocol which MSTP should operate on.
Parameter:
Multiple Spanning Tree Protocol:
Disabled / Enabled
Force Version:
STP / RSTP / MSTP
MSTP Region Config
To configure the basic identification of a MSTP bridge. Bridges participa-
ting in a common MST region must have the same Region Name and Revi-
sion Level.
Advertisement
Table of Contents
