Lancom GS-2124 User Manual page 77

LANCOM GS-2124
Chapter 4: Operation of Web- based Management
76
ARP Parameters: (When Frame Type = ARP)
ARP/RARP:
Range: Any / ARP / RARP / Other
Any: Including all ARP/RARP protocol frame types
ARP: Including all ARP protocol frame types
RARP: Including all RARP frame types
Other: Including other frame types except ARP/RARP protocol
Request/Reply:
Range: Any / Request / Reply
Any: Including all ARP/RARP Request and Reply
Request: Including all ARP/RARP request frames
Reply: Including all ARP/RARP reply frames
Sender IP Filter:
Range: Any / Host / Network
Any: Including all sender IP address
Host: Only one specific sender host IP address
Network: A specific IP subnet segment under the sender IP mask
Sender IP Address: Default: 192.168.1.1
Sender IP Mask: Default: 255.255.255.0
Target IP Filter:
Range: Any / Host / Network
Any: Including all target IP address
Host: Only one specific target host IP address
Network: A specific IP subnet segment under the target IP mask
Target IP Address: Default: 192.168.1.254
Target IP Mask: Default: 255.255.255.0
ARP SMAC Match:
Range: Any / 0 / 1
Any: Both 0 and 1
0: The ingress ARP frames where the source MAC address is not