Config - Lancom GS-2124 User Manual

4.11.1

Config

GVRP Config
In the function of GVRP Config, it is used to configure each port's GVRP
operation mode, in which there are seven parameters needed to be con-
figured described below.
Parameter:
GVRP State Setting:
This function is simply to let you enable or disable GVRP function. You
can pull down the list and click the <Downward> arrow key to choose
"Enable" or "Disable". Then, click the <Apply> button, the system
will take effect immediately.
Join Time:
Used to declare the Join Time in unit of centisecond. Valid time range:
20 –100 centisecond, Default: 20 centisecond.
Chapter 4: Operation of Web- based Management
LANCOM GS-2124
107