Email - Lancom GS-2124 User Manual

LANCOM GS-2124
Chapter 4: Operation of Web- based Management
4.17.2

Email

148
LACP:
LACP Disabled, LACP Enabled, LACP Member Added, LACP Port Fai-
lure
GVRP:
GVRP Disabled, GVRP Enabled
VLAN:
Port-based VLAN Enabled, Tag-based VLAN Enabled
Module Swap:
Module Inserted, Module Removed, Dual Media Swapped
Email/SMS Configuration
Alarm configuration is used to configure the persons who should receive
the alarm message via either email or SMS, or both. It depends on your
settings. An email address or a mobile phone number has to be set in the
web page of alarm configuration. Then, user can read the trap informa-
tion from the email or the mobile phone. This function provides 6 email
addresses and 6 mobile phone numbers at most. The 22 different trap
events will be sent out to SNMP Manager when trap event occurs. After
ticking trap events, you can fill in your desired email addresses and mobile
phone numbers. Then, please click <Apply> button to complete the alarm
configuration. It will take effect in a few seconds.
Note: SMS may not work in your mobile phone system. It is customized for
different systems.