Logout - Lancom GS-2124 User Manual

LANCOM GS-2124
Chapter 4: Operation of Web- based Management
4.21

Logout

You can manually logout by performing Logout function. In the switch, it pro-
vides another way to logout. You can configure it to logout automatically.
154
For each public trap, the switch supports the trap event Cold Start,
Warm Start, Link Down, Link Up and Authentication Failure Trap. They
can be enabled or disabled individually in the menu alarm > events.
For the configuration of the traps use the function alarm and events.
When enabled, the corresponded trap will actively send a trap mes-
sage to the trap host when a trap happens. If all public traps are
disabled, no public trap message will be sent. The Enterprise (no. 6)
trap is classified as private trap. It is listed in the Trap Alarm Configu-
ration function folder.
Default for all public traps: Enable.
Logout
The switch allows you to logout the system to prevent other users from the
system without the permission. If you do not logout and exit the browser,
the switch will automatically have you logout. Besides this manually
logout and implicit logout, you can pull down the <Auto Logout> list at
the right-top corner to explicitly ON/OFF this logout function.
Parameter:
Auto Logout:
If it is "ON", and no action and no key is stroke as well in any function
screen more than 3 minutes, the switch will have you logout auto-
matically. Default is ON.