Table of Contents
Advertisement
LANCOM GS-2124
Chapter 4: Operation of Web- based Management
108
Leave Time:
Used to declare the Leave Time in unit of centisecond. Valid time
range: 60 –300 centisecond, Default: 60 centisecond.
Leave All Time:
A time period for announcement that all registered device is going to
be de-registered. If someone still issues a new join, then a registration
will be kept in the switch. Valid range: 1.000-5.000 unit time, Default:
1.000 unit time.
Default Applicant Mode:
The mode here means the type of participant. There are two modes,
normal participant and non-participant, provided for the user's
choice.
Normal:
It is Normal Participant. In this mode, the switch participates nor-
mally in GARP protocol exchanges. The default setting is Normal.
Non-Participant:
It is Non-Participant. In this mode, the switch does not send or
reply any GARP messages. It just listens messages and reacts for
the received GVRP BPDU (Bridge Protocol Data Unit).
Default Registrar Mode:
The mode here means the type of Registrar. There are three types of
parameters for registrar administrative control value, normal registrar,
fixed registrar and forbidden registrar, provided for the user's choice.
Normal:
It is Normal Registration. The Registrar responds normally to inco-
ming GARP messages. The default setting is Normal.
Fixed:
It is Registration Fixed. The Registrar ignores all GARP messages,
and all members remain in the registered (IN) state.
Forbidden:
It is Registration Forbidden. The Registrar ignores all GARP mes-
sages, and all members remain in the unregistered (EMPTY) state.
Advertisement
Table of Contents
