Table of Contents
Advertisement
LANCOM GS-2124
Chapter 4: Operation of Web- based Management
IP address:
Users can configure the IP settings and fill in new values if users set
the DHCP function "Disable". Then, click <Apply> button to update.
When DHCP is disabled, Default: 192.168.1.1 If DHCP is enabled, this
field is filled by DHCP server and will not allow user manually set it any
more.
Subnet mask:
The subnet mask divides the IP address in two parts, one for the net-
work and one for the device. The part of the network denotes the net-
work of the computer. Only computer in the same network are able to
communicate with each other. With devices of other networks can
only be communicate through a router. The part of the device denotes
the single device in a network. The address of the device within a net-
work needs to be unambiguously.
For more information, please also see the Section "IP Address Assign-
ment" in this manual. Default: 255.255.255.0
Default gateway:
Set an IP address for a gateway to handle those packets that do not
meet the routing rules predefined in the device. If a packet does not
meet the criteria for other pre-defined path, it must be forwarded to
a default router on a default path. This means any packet with unde-
fined IP address in the routing table will be sent to this device uncon-
ditionally.
37
Advertisement
Table of Contents
