System Log - Lancom GS-2124 User Manual

LANCOM GS-2124
Chapter 4: Operation of Web- based Management
4.3.5

System Log

The System Log provides information about system logs, including information
when the device was booted, how the ports are operating, when users logged
in, when sessions timed out, as well as other system information.
42
the ports that you would like them to be worked and restricted in the
management security configuration if "Custom" had been chosen.
Access Type:
The switch supports two kinds of options for managed valid Access
Type, including "Any" and "Custom". Default is "Any". "Http", "Telnet"
and "SNMP" are three ways for the access and managing the switch
in case that" Custom" had been chosen.
Action:
The switch supports two kinds of options for managed valid Action
Type, including "Deny" and "Accept". Default is "Deny". When you
choose "Deny" action, you will be restricted and refused to manage
the switch due to the "Access Type" you choose. However, while you
select "Accept" action, you will have the authority to manage the
switch.
Edit/Create:
A new entry of Management Security Configuration can be created
after the parameters as mentioned above had been setup and then
press <Edit/Create> button. Of course, the existed entry also can be
modified by pressing this button.
Delete:
Remove the existed entry of Management Security Configuration from
the management security table.