Lancom GS-2124 User Manual page 116

Parameter:
QCL#:
QCL number : 1~24
QCE Type:
Ethernet Type / VLAN ID / UDP/TCP Port / DSCP / ToS / Tag Priority
Ethernet Type Value:
The configurable range is 0x600~0xFFFF. Well known protocols
already assigned EtherType values. The commonly used values in the
EtherType field and corresponding protocols are listed below:
Ethertype Protocol
(Hexadecimal)
0x0800 IP, Internet Protocol
0x0801 X.75 Internet
0x0802 NBS Internet
0x0803 ECMA Internet
0x0804 Chaosnet
0x0805 X.25 Level 3
0x0806 ARP, Address Resolution Protocol.
0x0808 Frame Relay ARP [RFC1701]
0x6559 Raw Frame Relay [RFC1701]
0x8035 DRARP, Dynamic RARP. RARP, Reverse Address Resolution Protocol.
0x8037 Novell Netware IPX
0x809B EtherTalk (AppleTalk over Ethernet)
0x80D5 IBM SNA Services over Ethernet
0x 80F3 AARP, AppleTalk Address Resolution Protocol.
0x8100 IEEE Std 802.1Q - Customer VLAN Tag Type.
0x8137 IPX, Internet Packet Exchange.
0x 814C SNMP, Simple Network Management Protocol.
0x86DD IPv6, Internet Protocol version 6.
0x880B PPP, Point-to-Point Protocol.
0x 880C GSMP, General Switch Management Protocol.
Chapter 4: Operation of Web- based Management
LANCOM GS-2124
115