Server - Lancom GS-2124 User Manual

LANCOM GS-2124
Chapter 4: Operation of Web- based Management
authorized, the devices connected to this port can access the network
resource through this port.
802.1x Port-based Network Access Control function supported by the switch
is little bit complex, for it just support basic Multihost mode, which can dis-
tinguish the device's MAC address and its VID. The following table is the sum-
mary of the combination of the authentication status and the port status
versus the status of port mode, set in 802.1x Port mode, port control state, set
in 802.1x port setting. Here Entry Authorized means MAC entry is authorized.
Port Mode
Disable
Multihost
Multihost
Multihost
Multihost
4.9.1

Server

98
Port Control
Don't Care
Auto
Auto
ForceUnauthorized
ForceAuthorized
802.1X Server Configuration
This function is used to configure the global parameters for RADIUS
authentication in 802.1X port security application.
Authentication Port Status
Don't Care Port Uncontrolled
Successful Port Authorized
Failure Port Unauthorized
Don't Care Port Unauthorized
Don't Care Port Authorized