4 Operation Of Web-Based Management - Lancom GS-2124 User Manual

4 Operation of Web-based Management

This chapter instructs you how to configure and manage the LANCOM GS-
2124 through the web user interface it supports. With this facility, you can
easily access and monitor through any one port of the switch all the status of
the switch, including MIBs status, each port activity, Spanning tree status,
port aggregation status, multicast traffic, VLAN and priority status, even ille-
gal access record and so on.
The default values of the managed switch are listed in the table below:
IP Adress
Subnet Mask
Default Gateway
Default DNS-Server
Username
Password
After the managed switch has been finished configuration in the CLI via the
switch's serial interface, you can browse it. For instance, type http://
192.168.1.1 in the address row in a browser, it will show the following screen
and ask you to input username and password in order to login and access. The
default username and password are both "admin". For the first time to use,
please enter the default username and password, then click the <Login> but-
ton. The login process now is completed.
In this login menu, you have to input the complete username and password
respectively, the switch will not give you a shortcut to username automatically.
This looks inconvenient, but safer.
In the switch, it supports a simple user management function allowing only
one administrator to configure the system at the same time. If there are two
or more users using administrator's identity, the switch will allow the only one
who logins first to configure the system. The rest of users, even with adminis-
trator's identity, can only monitor the system. For those who have no adminis-
trator's identity, can only monitor the system. There are only a maximum of
three users able to login simultaneously in the switch.
Chapter 4: Operation of Web- based Management
LANCOM GS-2124
172.23.56.250
255.255.255.0
172.23.56.254
172.23.56.254
admin
admin
LANCOM GS-2124
27