Rate Limiters - Lancom GS-2124 User Manual

Policy ID:
Policy ID range:1~8
Action:
Permit or Deny forwarding the met ACL packets
Rate Limiter ID:
Disabled: Disable Rate Limitation
Rate Limiter ID Range: 1~16. To select one of rate limiter ID for this
port, it will limit met ACL packets by rate limiter ID configuration.
Port Copy:
Disabled: Disable to copy the met ACL packets to specific port.
Port number: 1~24. Copy the met ACL packets to the selected port.
Counter:
The counter will increase from initial value 0, when this port received
one of the met ACL packet the counter value will increase +1
4.6.2

Rate Limiters

ACL Rate Limiter Configuration
There are 16 rate limiter ID. You can assign one of the limiter ID for each
port. The rate limit configuration unit is Packet Per Second (pps).
Chapter 4: Operation of Web- based Management
LANCOM GS-2124
71