Management Policy - Lancom GS-2124 User Manual

Loop Detection
Display whether switch open Loop detection.
Parameter:
Port No:
Display the port number. The number is 1 - 24.
Detection Port - Enable:
When Port No is chosen, and enable port' s Loop detection, the port
can detect loop happens. When Port-No is chosen, enable port' s
Loop detection, and the port detects loop happen, port will be Locked.
If Loop did not happen, port maintains Unlocked.
Locked Port - Resume:
When Port No is chosen, enable port' s Loop detection, and the port
detects loop happen, the port will be Locked. When choosing Resume,
port locked will be opened and turned into unlocked. If not choosing
Resume, Port maintains locked.
4.3.4

Management Policy

Through the management security configuration, the manager can do the
strict setup to control the switch and limit the user to access this switch.
The following rules are offered for the manager to manage the switch:
³
When no lists exists, then it will accept all connections.
·
When only "accept lists" exist, then it will deny all connections, excluding
the connection inside of the accepting range.
Chapter 4: Operation of Web- based Management
LANCOM GS-2124
39