Config File - Lancom ES-2126+ Manual

LANCOM ES-2126+ und LANCOM ES-2126P
Chapter 3: Configuring and monitoring the LANCOM switch
3.2.2

Config file

26
Here you can save the current configuration to the flash memory as a user
configuration.
Restore default configuration (includes default IP address)
Here you can reset the switch to its factory settings. The default configu-
ration replaces the start configuration. The device is reset to Auto DHCP
and it retrieves its IP address from a DHCP server in the network. If no
DHCP server is available, the device takes the IP address "172.23.56.252"
(LANCOM ES-2126+) or "172.23.56.251" (LANCOM ES-2126P).
Restore default configuration (excludes current IP address)
Here you can reset the switch to its factory settings. The default configu-
ration replaces the start configuration. However, the switch's current IP
address as set up by the user is not changed and will NOT be restored to
the default value.
Restore user configuration
Restore User Configuration function retrieves the previous confirmed wor-
king configuration from the flash memory to update the start configura-
tion. After restoring the configuration, the system's start configuration is
updated and activated after rebooting.
Config file
With this function you can backup or reload the start and user configura-
tion via TFTP.
Parameter